5th gen "coil on plug" setup project

Rangerscott · 07-18-2011, 11:29 PM

It never stops, does it? Moving onto my next project. Since I don't feel like modifying the 6th gen airbox, I'm just going to go this route.

http://www.youtube.com/watch?v=mKDeS2ZBm0s

101lifts2 · 07-19-2011, 02:17 AM

It's apparent this guy is pretty clueless about the electronic ignition system.

What is this clown exactly trying to accomplish? He doesn't like the coils that are located under the fuel tank that you can't see anyway?

Uh..yeah..the three wires are for the hall effect driver that operates the primary coil control. The third wire is for the transistor low side current path.

Clown...

askmrjesus · 07-19-2011, 08:27 AM

Cliff Notes:

"I don't know jack shit about how any of this works, but it should be fine."

JC

Rangerscott · 07-19-2011, 08:34 AM

Quote:

Originally Posted by 101lifts2

It's apparent this guy is pretty clueless about the electronic ignition system.

What is this clown exactly trying to accomplish? He doesn't like the coils that are located under the fuel tank that you can't see anyway?

Uh..yeah..the three wires are for the hall effect driver that operates the primary coil control. The third wire is for the transistor low side current path.

Clown...

If you would have watched the vid youd know why Im doing it. 5th gens are just two wire coils just like most motorcycles so I'm fine in the wiring department. People have been using moto coil on plugs on vehicle engine conversions for years and motorcycles so I know it'll work.

Also Im not a clown seeing as Ive worked on everythig Ive owned and nothing Ive done has broken. Go be a douche somewhere else.

Rangerscott · 07-24-2011, 12:14 AM

This clown has finished.

Donor harness.

http://www.youtube.com/watch?v=bP5h_XF-_Rw

Modified connectors

http://www.youtube.com/watch?v=MrzVZpg4EZA

Test start

http://www.youtube.com/watch?v=yVPNyVOlz9k

101lifts2 · 07-24-2011, 12:56 AM

Quote:

Originally Posted by Rangerscott

If you would have watched the vid youd know why Im doing it. 5th gens are just two wire coils just like most motorcycles so I'm fine in the wiring department. People have been using moto coil on plugs on vehicle engine conversions for years and motorcycles so I know it'll work.

Also Im not a clown seeing as Ive worked on everythig Ive owned and nothing Ive done has broken. Go be a douche somewhere else.

The clown I'm referring to is the guy in the video...but you are more than welcome to join him in the clowness as you see fit.

You or him or whomever can do whatever the fuck you wish to your bike. Be my guest...but when you modify something , there usually is some type of gain of some sort. There is absolutely no gain in what this guy is doing because all of that shit is buried under the fuel tank and most likely will prematurely wear out the driver in the ignition module.

Does he not realize that there is resistance from the secondary coil through the boot just as there is via a spark plug wire?

I would have hoped he measured the primary coil resistance on both the coil over plug vs the separate coil so he doesn't prematurely wear out the driver in the ignition module. Oh wait he doesn't even know what an ignition module is.

This is the guy that tells you this at a bike night and you're thinking to yourself...what a dolt.

Rangerscott · 07-24-2011, 02:18 AM

I'm the one that made the vids dumbass.

You're the guy that's too scared to pick of a screw driver. "OMG! Don't do that! If the manufacture didn't do that then it must have never meant to be."

The 6th gens use coil on plugs and their engine is the exact same (except for vtec) and they use the same spark plugs, same sensors, and the harness is almost the same.

Particle Man · 07-24-2011, 08:43 AM

Quote:

Originally Posted by 101lifts2

The clown I'm referring to is the guy in the video...but you are more than welcome to join him in the clowness as you see fit.

Wow, I can't believe he had to spell out the obvious about who was in the vid

Avatard · 07-24-2011, 12:36 PM

101s a funny dude, man. Sometimes, he says brilliant shit, and you'd fucking swear someone hacked his account. Then this.

Engineers. Weird.

Avatard · 07-24-2011, 12:38 PM

That's why companies never let them talk directly to the public, btw.

Would cause fucking panic. Lol.

07-18-2011, 11:29 PM	#1
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	5th gen "coil on plug" setup project It never stops, does it? Moving onto my next project. Since I don't feel like modifying the 6th gen airbox, I'm just going to go this route. http://www.youtube.com/watch?v=mKDeS2ZBm0s

07-19-2011, 02:17 AM	#2
101lifts2 WSB Champion Join Date: Nov 2008 Location: Anaheim, CA Moto: 2009 Kawi ZX6R Posts: 5,570	It's apparent this guy is pretty clueless about the electronic ignition system. What is this clown exactly trying to accomplish? He doesn't like the coils that are located under the fuel tank that you can't see anyway? Uh..yeah..the three wires are for the hall effect driver that operates the primary coil control. The third wire is for the transistor low side current path. Clown... __________________ Train Hard Ron Paul - 2012 Mark of Excellence GM

07-19-2011, 08:27 AM	#3
askmrjesus Soul Man Join Date: Nov 2008 Location: Everywhere, all the time. Moto: '0000 Custom Turbo Cross (with jet kit). Posts: 6,481	Cliff Notes: "I don't know jack shit about how any of this works, but it should be fine." JC __________________ The way things are going, they're gonna crucify me.

07-24-2011, 02:18 AM	#7
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	I'm the one that made the vids dumbass. You're the guy that's too scared to pick of a screw driver. "OMG! Don't do that! If the manufacture didn't do that then it must have never meant to be." The 6th gens use coil on plugs and their engine is the exact same (except for vtec) and they use the same spark plugs, same sensors, and the harness is almost the same. Last edited by Rangerscott; 07-24-2011 at 02:24 AM..

07-24-2011, 12:36 PM	#9
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	101s a funny dude, man. Sometimes, he says brilliant shit, and you'd fucking swear someone hacked his account. Then this. Engineers. Weird. __________________ Insert free thought here.

07-24-2011, 12:14 AM	#5
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	This clown has finished. Donor harness. http://www.youtube.com/watch?v=bP5h_XF-_Rw Modified connectors http://www.youtube.com/watch?v=MrzVZpg4EZA Test start http://www.youtube.com/watch?v=yVPNyVOlz9k

07-24-2011, 12:38 PM	#10
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	That's why companies never let them talk directly to the public, btw. Would cause fucking panic. Lol. __________________ Insert free thought here.